Brabus takes the Porsche 911 Turbo S to 800 hp
Brabus has introduced its PowerXtra P36-800 package for the latest Porsche 911 Turbo S, bringing claimed 800 hp, carbon-fibre bodywork and an optional lower stance.
By Rudi Louw ·

Brabus has turned its attention to the latest Porsche 911 Turbo S, introducing the PowerXtra P36-800 package for both the coupe and convertible. The headline figure is a claimed 800 hp (588 kW) and 664 lb-ft of torque, or about 900 Nm, from Porsche’s hybrid twin-turbocharged 3.0-litre flat-six arrangement.
That is a substantial number even in a world where the standard 911 Turbo S is hardly short of urgency. Brabus says the upgraded coupe can reach 62 mph (100 km/h) in 2.4 seconds, while the convertible takes 2.5 seconds. Both retain an electronically limited top speed of 200 mph (322 km/h).

An extra control module, not a mechanical rebuild
Rather than changing the engine’s mechanical components, Brabus has developed a plug-and-play auxiliary control module for the 911 Turbo S. According to the tuner, the module leaves the 71 hp electric motor untouched and concentrates on increasing output from the combustion engine.
Brabus says the petrol engine rises from 640 hp to 729 hp (536 kW), while torque increases from 561 lb-ft to 634 lb-ft. With the electric motor’s contribution included, the company quotes the 800 hp and 664 lb-ft total-system figures. It is a fairly focused route to more performance: leave the electric assistance alone and ask the flat-six to do considerably more of the shouting.
The PowerXtra P36-800 kit is offered for both body styles, so buyers choosing open-air motoring do not have to settle for a lesser output. The claimed acceleration difference between the two is only one tenth of a second, although the convertible naturally carries the additional weight and structural hardware required by its folding roof.

Carbon-fibre additions and a lower ride height
Brabus has also prepared a suite of exterior parts intended to give the Turbo S a more distinctive appearance. At the front, the package can add carbon-fibre detailing to the active air vents, the air-intake shrouds and the front splitter. An exposed carbon-fibre bonnet is also shown on the car, for those who feel subtlety has already had quite a long run in the 911 catalogue.
At the rear, the modifications include a fixed carbon-fibre wing, a carbon-fibre diffuser and Brabus branding finished in the same material. The tuner also fits new tailpipes with electronically controlled valves, adding another adjustable element to the car’s exhaust system.
Optional wheels measure 21 inches at the front and 22 inches at the rear, maintaining a staggered setup. They are fitted with Continental SportContact 7 tyres. Brabus also offers KW lowering springs, which reduce ride height by one inch at both the front and rear.
The cabin can receive the same treatment
The interior is not limited to the standard Turbo S specification either. Brabus offers a carbon-fibre weave across the steering wheel, dashboard and centre console, alongside illuminated carbon-fibre scuff plates and quilted black leather upholstery.
Further cabin details include aluminium panels and additional leather on the steering wheel. Brabus has not provided pricing for the PowerXtra P36-800 package or the individual cosmetic and interior options in the supplied information.
Source: CarScoops











